• The extrusion molded Aluminium Bottom barcan be detached from any direction without causing any damage, while the door has been fitted with a safety feature, designed to open automatically via an electric or pneumatic system. Side Covers are attached.
• In case the Bottom Bar senses a collision, the dual cut-off switch automatically cuts the power supply. There are no exposed junction boxes
• Bottom Bars are preinstalled in the factory

• Standard 0.5HP, 3-phase, 60Hz, Single-Speed, brake fitted electric drive motor.
• Optional brake fitted dual speed drive motor is available. The motor and all other electronic parts are wired and installed in one junction box at the factory

• The enclosure, which has a viewing window, houses a NEMA type 12 control with an integrated microprocessor.The control panel is assembled, wired and tested before distribution.
• An LCD screen on the controller displays the number of opened and closed doors

• Possible for panels to be exchanged for Vinyl parts with a sectional weight of 0.9kg, and possible for a maximum of 4 panels to be connected using supports.
• Possible for panels to be exchanged with clear 2mm PVC panels above the total width of the door

• The bottom bar can be detached and is formed out of extraction molded aluminum (C type and T type). The bottom part is finished with a vinyl loop seal.
• In case the Bottom Bar senses a collision, the dual cut-off switch automatically cuts the power supply. There are no exposed junction boxes. The Bottom Bar is pre-installed at the factory.

• 1.0HP, 3-phase, 60Hz, brake fitted single speed electric drive motor.
• The motor and all other electronic parts are wired and installed in one junction box at the factory

• The enclosure houses a NEMA type 12 control with an integrated general relay logic circuit
• Controllers with integrated micro processing semiconductors are optional. All assembly, wiring,and testing were done at the factory.
• A counter displays the number of opened and closed doors

• Two layers of multiple mesh fibers ensures excellent seal strength
• T Thickness set based on the wind pressure, weight and the size.

• The extrusion molded Aluminium Bottom bar can be detached from any direction without causing any damage, while the door has been fitted with a safety feature, designed to open automatically via an electric or pneumatic system.
• No need to open the side covers to re-attached the Bottom bar.
• In case the Bottom Bar senses a collision, the dual cut-off switch automatically cuts the power supply. There are no exposed junction boxes. The Vinyl Loop completely seals the bottom

• Base Model - 1.2HP, 1.4HP, Dual Speed, brake fitted electric drive motor.
• AC Drive Specifications- 1.0HP, Single Speed, brake and AC drive control fitted electric drive motor.
• Single Speed Specifications - 5HP, Single Speed, brake fitted electric drive motor.
• Common specifications - The motor and all other electronic parts are wired and installed in one junction box at the factory.

• Base model - 2m/sec when opening. 0.76m/sec when closing.
• AC Drive Specifications - Programmable up to 2.54m/sec when opening.
• Single Speed Specifications - 1m/sec when opening/closing.

• The enclosure houses a NEMA type 12 control with an integrated self-assessment and microprocessor unit.
• The control panel is assembled, wired and tested before distribution.
• An LCD screen on the controller displays the number of opened and closed doors

* AC Drive specifications - A motor fitted with a dynamic braking system,complete with a programmable AC drive controller with an LCD display.